Airdog II-5G 220 GPH Air Fuel Separation Lift Pump System 01-10 GM Duramax
HomeStore

Airdog II-5G 220 GPH Air Fuel Separation Lift Pump System 01-10 GM Duramax

Airdog II-5G 220 GPH Air Fuel Separation Lift Pump System 01-10 GM Duramax

$230.70

Original: $769.00

-70%
Airdog II-5G 220 GPH Air Fuel Separation Lift Pump System 01-10 GM Duramax

$769.00

$230.70

The Story

Why GM opted not to include a factory fuel lift pump on all of the early model Duramax is still a mystery. While the CP3 injection pump can draw adequate fuel pressure at stock power levels (barely!), anything above that has been proven that fuel pressure quickly begins to drop off, limiting the amount of overall power that can be achieved, as well as decreasing potential fuel economy, and potentially harming the injection pump and injectors due to a lack of lubrication.

The AirDog II-5G is an all-in-one premium fuel pump and filtration system for your 2001-2010 Duramax diesel. This system removes water, particulates, and entrained air from the diesel fuel. The entrained air that is separated from the fuel is returned to the tank through a small return fitting. The fuel is delivered to the engine at the correct pressure and flow rate to meet the demands of the engine under all operating conditions.

The AirDog II-5G DF-220 systems feature a built-in adjustable diaphragm pressure regulator. All AirDog II-5G systems include a complete installation kit. The AirDog II-5G, for this particular application, is preset at 8-10 psi from the factory for a stock application. The regulator is adjustable up to 55 psi for fine-tuning the system to perfectly match up to your current and future performance upgrades.

HOW IT WORKS:
The AirDog II-5G DF-220 draws fuel from the fuel tank through a 5/8” suction line to reduce the risk of cavitation at the pump. The fuel is then drawn through the water separator where 92% of water is removed per SAE spec 1488. It is then pressurized through a Gearotor pump and sent to the 2-micron fuel filter before it is sent to the injection pump. The air from aerated fuel, due to tank sloshing and engine return lines, is separated and sent back to the tank through the 3/8” return fitting. The excess fuel that the engine does not use is recirculated through the diaphragm regulator back to the suction side of the pump.

Description

Why GM opted not to include a factory fuel lift pump on all of the early model Duramax is still a mystery. While the CP3 injection pump can draw adequate fuel pressure at stock power levels (barely!), anything above that has been proven that fuel pressure quickly begins to drop off, limiting the amount of overall power that can be achieved, as well as decreasing potential fuel economy, and potentially harming the injection pump and injectors due to a lack of lubrication.

The AirDog II-5G is an all-in-one premium fuel pump and filtration system for your 2001-2010 Duramax diesel. This system removes water, particulates, and entrained air from the diesel fuel. The entrained air that is separated from the fuel is returned to the tank through a small return fitting. The fuel is delivered to the engine at the correct pressure and flow rate to meet the demands of the engine under all operating conditions.

The AirDog II-5G DF-220 systems feature a built-in adjustable diaphragm pressure regulator. All AirDog II-5G systems include a complete installation kit. The AirDog II-5G, for this particular application, is preset at 8-10 psi from the factory for a stock application. The regulator is adjustable up to 55 psi for fine-tuning the system to perfectly match up to your current and future performance upgrades.

HOW IT WORKS:
The AirDog II-5G DF-220 draws fuel from the fuel tank through a 5/8” suction line to reduce the risk of cavitation at the pump. The fuel is then drawn through the water separator where 92% of water is removed per SAE spec 1488. It is then pressurized through a Gearotor pump and sent to the 2-micron fuel filter before it is sent to the injection pump. The air from aerated fuel, due to tank sloshing and engine return lines, is separated and sent back to the tank through the 3/8” return fitting. The excess fuel that the engine does not use is recirculated through the diaphragm regulator back to the suction side of the pump.

You may also like

NEW
Thumbnail 1

Industrial Injection Reman Stock Replacement Injectors With Install Kit 01-04 GM 6.6L Duramax LB7

$2,821.68

-70%NEW
Thumbnail 1Thumbnail 2

AFE 46-20045 BladeRunner 3" Intercooler Hot and Cold Side Tubes 02-04 6.6L GM Duramax LB7

$504.13

$151.24

-70%NEW
Thumbnail 1Thumbnail 2

AFE 46-20046 BladeRunner 3" Intercooler Hot Side Tube with Coupling 01-04 6.6L GM Duramax LB7

$298.78

$89.63

-70%NEW
Thumbnail 1Thumbnail 2

AFE 46-20047 BladeRunner 3" Intercooler Cold Side Tube 02-04 6.6L GM Duramax LB7

$247.90

$74.37

-70%NEW
Thumbnail 1Thumbnail 2

AFE DFS780 PRO Fuel System (Full Time Operation) 01-16 GM 6.6L Duramax

$767.60

$230.28

-70%NEW
Thumbnail 1Thumbnail 2

AFE 49-04093 ATLAS Series 3" Steel Turbo Direct Pipe 01-04 GM 6.6L Duramax LB7

$252.00

$75.60

-70%NEW
Thumbnail 1

AFE Sway-A-Way 2.5" Rear Shock Kit (Pair) 01-10 GM 6.6L Duramax

$950.00

$285.00

-70%NEW
Thumbnail 1

AFE Sway-A-Way 2.5" Front Shock Kit (Pair) 01-10 GM 6.6L Duramax

$1,044.05

$313.21

-70%NEW
Thumbnail 1Thumbnail 2

AFE DFS780 Fuel System (Boost Activated) 01-10 6.6L GM Duramax

$950.00

$285.00

-70%NEW
Thumbnail 1Thumbnail 2

AFE BladeRunner Street Series Turbocharger 01-04 6.6L GM Duramax

$1,599.80

$479.94

-70%NEW
Thumbnail 1Thumbnail 2

AFE BladeRunner Iron Exhaust Manifolds 01-16 GM 6.6L Duramax

$654.55

$196.36

-70%NEW
Thumbnail 1Thumbnail 2

AFE MACH Force XP 4" Stainless Cat Back Exhaust 2001-05 GM 6.6L Duramax

$594.00

$178.20

Airdog II-5G 220 GPH Air Fuel Separation Lift Pump System 01-10 GM Duramax | Diesel Power Products