Are you ready to gain some altitude in your Ram 2500 coupled with increased suspension performance? Whether your truck stays on the pavement or you like to hit some dirt on the weekends, this kit from BDS will not only deliver additional ride height for larger tire fitment and improved ground clearance but also a better ride, regardless of the conditions. As far as quality...no cheap coil or radius arm spacers here, only fine-tuned Pro-Ride coils and high-strength tubular radius arms with this kit!

At the heart of this system is a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation. Pairing with the Arms is a pair of full-length, diesel-specific, progressive-rate Pro-Ride coil springs that are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, the direct OE replacement coil springs are engineered with properly sized wire diameters. This results in maximum reliability without premature coil bind.

With all of these together you get a 4" front lift and 2.5" rear lift for a leveled superior performing vehicle. Whether you are going off-roading or just want a truck that handles well on both the weekdays and weekends you cannot beat BDS's 4" Radius Arm Lift Kit that combines quality, performance, and easy installation into one amazing kit.

Shock Options:

NX2 Nitro Series Shocks - BDS NX2 series gas shocks offer impressive performance on and offroad. They use a nitrogen-charged, twin-tube design with 10-stage velocity-sensitive valving for lightning-fast dampening and superior control.
FOX 2.0 Performance Series Shocks - Fox 2.0 performance series shocks have been tuned and tested by both FOX and BDS Suspension to maximize performance specific to each application and every BDS Suspension system. The Internal Floating Piston (IFP) shock design is based on proven Fox Racing Shocks race products but re-designed to maximize the ride quality, handling, and control of your BDS-equipped truck, whether on or off the road.
FOX 2.0 Performance Series HTO - For those that are looking for some extra off-road performance but don't need an expansive package, FOX 2.5 Performance Series with Hydraulic Top Out (HTO) is right up your alley. Continuing the toughness and quality of the 2.0 series, these are made with HTO built in that gives you usable position-sensitive rebound damping control on and off the pavement. Perfect for those that want amazing performance whether it's pavement, gravel, or dirt you are driving on.
FOX 2.5 Performance Elite Series - Need to kick your suspension up another notch? The FOX 2.5 Performance Elite Series greatly expands your off-road capabilities and how much punishment your shocks can take. Made with external reservoirs to keep your shock oil away from high stress and higher temperatures, the elite series shocks are part of a suspension that will handle whatever you throw at it. Comes with easy adjustments to switch between different terrains, load and speed. Dual Speed Compression Adjuster comes standard.

Steering Stabilizer Options:

Dual NX2 Nitro Series: Upgrade to a dual steering stabilizer setup which gives further enhanced vehicle control and lessens side-to-side motion to a greater effect. Heavy off-roading requires a heavy suspension that can handle it but can still be smooth on asphalt.
Dual FOX 2.0 Performance Series: Taking things even further is the dual FOX 2.0 setup. Built to last from the top up this performance setup will enhance control, reduce shimmy and bump steer, and improve tire wear and front-end component life. Protect your investment and smooth out your rough spots before they leave you figuratively hanging.

Front Sway Bar Link Disconnect Kit

Planning on some off-roading? Get a Sway Bar Disconnect kit so your suspension has a bigger range so you can go over uneven terrain with your tires firmly planted. Improve your handling and prevent body roll with this manual disconnect that unlocks your suspension's true potential.

Carrier Bearing Drop Kit

A 2-piece rear drive shaft will require some extra work as the geometry of your drive system will now have some added stress. We recommend adding this carrier bearing drop to avoid any potential driveline vibration with the added lift height.

2025-2026 Ram 6.7L Cummins

BD Diesel E-PAS Positive Air Shut-Off 25-26 Ram 6.7L Cummins

BDS Suspension 4" Radius Arm Lift Kit 25-26 Ram 2500

Edge EZ Performance Chip Module 25-26 Ram 6.7L Cummins

AFE Power Momentum HD Cold Air Intake System 25-26 Ram 6.7L Cummins

AFE Power Magnum Force Stage-2 Cold Air Intake System 25-26 Ram 6.7L Cummins